{"id":3517,"date":"2026-10-09T05:15:00","date_gmt":"2026-10-08T21:15:00","guid":{"rendered":"http:\/\/www.commercialdiplomat.com\/blog\/?p=3517"},"modified":"2026-10-09T05:15:00","modified_gmt":"2026-10-08T21:15:00","slug":"what-are-the-welding-properties-of-steel-centrifugal-castings-4b98-4ab09d","status":"publish","type":"post","link":"http:\/\/www.commercialdiplomat.com\/blog\/2026\/10\/09\/what-are-the-welding-properties-of-steel-centrifugal-castings-4b98-4ab09d\/","title":{"rendered":"What are the welding properties of steel centrifugal castings?"},"content":{"rendered":"

Hey there, if you\u2019ve ever worked with heavy machinery, industrial pumps, or custom metal parts that need to hold up under insane pressure or extreme temperatures, chances are you\u2019ve crossed paths with steel centrifugal castings. As a steel centrifugal castings supplier, I get asked all the time about how these castings weld\u2014like, is it just like welding regular rolled steel, or is there a whole different set of rules to follow? Let me break this down like I would to a regular at the shop, no fancy jargon that makes your eyes glaze over. Steel Centrifugal Castings<\/a><\/p>\n

<\/p>\n

First off, let\u2019s get one thing straight: centrifugal cast steel isn\u2019t your run-of-the-mill metal. When we make these parts, we pour molten steel into a spinning mold (centrifugal force is the star here) so the metal slams against the mold walls evenly\u2014no weird porosity spots, a tight grain structure all the way through, which is way stronger than static castings. That same structure is what makes their welding properties unique. Let\u2019s start with the good stuff, because I don\u2019t want to lead with the hard parts and scare you off.<\/p>\n

Weldability here is actually way better than a lot of people assume\u2014especially if you\u2019re working with the right steel grade, like carbon steel or low-alloy centrifugal castings, which are the most common stuff we supply for pumps, valves, and mining parts. I\u2019ve had a guy come in last month who thought centrifugal cast steel would be impossible to weld because he\u2019d messed with some static cast parts before that were super crack-prone, and he left surprised when we fixed his broken impeller in a day. Why is that? The fine, uniform grain structure from centrifugal casting means less segregation\u2014those are the weird, weak spots where different metals separate out during solidification. Less segregation = fewer places for cracks to form when you heat it up for welding. That\u2019s a big win.<\/p>\n

But wait, it\u2019s not all smooth sailing. The biggest thing I always warn customers about is hardening tendencies. Centrifugal cast steel, especially if it\u2019s got higher carbon or alloy content (like the grades we use for high-stress pump casings), can get really hard and brittle in the heat-affected zone (HAZ)\u2014that area around your weld that doesn\u2019t melt, but gets super hot. Think of it like toasting bread: too much heat too fast, and the outside gets burnt and brittle instead of just warm. The HAZ is where most welding failures happen, not the weld itself, right? Because the base metal there changed structure when you heated it. But here\u2019s the thing: you can manage that. A lot of new welders don\u2019t realize that centrifugal castings don\u2019t need the same preheating as static castings sometimes, but wait\u2014no, actually, it depends on the grade. If it\u2019s a high-alloy centrifugal casting, preheating to like 200-300\u00b0C is non-negotiable. We send a little spec sheet with every part we ship, and that\u2019s the first line item on it for welders. Skip that preheat, and you\u2019re rolling the dice on cold cracks\u2014those are the ones that pop up days later, not right after welding, which is way worse because you can\u2019t catch it on a quick inspection.<\/p>\n

Another thing that\u2019s different from rolled steel: residual stresses. Centrifugal casting solidifies from the outside in, right? So the outer layer cools faster than the inner core, which leaves some internal stresses locked in. When you weld, you\u2019re adding more heat, and that expands and contracts the metal, so if you don\u2019t release those residual stresses first, the weld can warp or crack. That\u2019s why post-weld heat treatment (PWHT) is a must for most of our centrifugal castings over a certain size. We tell customers that for anything over, say, 100kg, take it to an oven and hold it at 600-650\u00b0C for an hour per inch of thickness, then cool it slowly. I know, that\u2019s extra work, but it\u2019s way cheaper than having a part fail mid-shift and shut down a whole operation.<\/p>\n

Now, let\u2019s talk about common mistakes I see people making with these parts. Last week, a fabricator came in with a broken centrifugal cast valve body he tried to weld on a job site. He used a generic E7018 electrode, which works fine for rolled steel, but for centrifugal cast carbon steel, you need a matching or slightly overmatch electrode. Wait, what does that mean? Matching means the electrode has the same carbon and alloy content as the base metal, so the weld metal matches the strength of the casting. Slight overmatch is for high-stress parts, so the weld is a little stronger than the base, which makes sense because the HAZ is always a little weaker. He used the wrong electrode, and when he pressure tested the part, the weld split at the HAZ. Oops. That\u2019s the kind of mistake that makes me want to walk fabricators through a quick refresher, especially if they\u2019re new to working with cast centrifugal parts.<\/p>\n

Oh, and porosity\u2014wait, is that a welding thing or a casting thing? Sometimes both. If the centrifugal casting was made right (no trapped gas or uneven solidification), porosity is less of an issue, but when you weld, if you don\u2019t clean the surface properly, mill scale or leftover mold release can get into the weld pool and cause small holes. I always tell guys to grind the weld area down to bare metal before starting, no shortcuts. We test every casting before it leaves our shop with ultrasonic testing, so you don\u2019t have to worry about internal porosity from our end, but surface prep is on you once you get the part.<\/p>\n

What about different types of steel centrifugal castings? Let\u2019s break that down, because not all of them weld the same. Our most popular grade is carbon steel (like ASTM A487 CA15 or CA6NM\u2014wait, I use those spec numbers because that\u2019s what most industries use), which is super weldable as long as you follow the preheat and electrode rules. Then we do low-alloy steels, like 4140 centrifugal castings, which are used for things like gear blanks and heavy shafts. Those have higher chromium and molybdenum, so their hardening tendency is higher\u2014preheat to 300\u00b0C minimum, PWHT is almost mandatory, and you need low-hydrogen electrodes, like E8018-B2. High-alloy grades, like stainless steel centrifugal castings for food or chemical processing, are a different story\u2014they have nickel and chromium, so they\u2019re more prone to hot cracking (cracking while the weld is still molten) if you use too much heat. You have to use a smaller weld bead, move faster, and keep the heat input low. That\u2019s why we usually recommend certified welders for stainless centrifugal castings, not just random guys with a MIG gun.<\/p>\n

Wait, let\u2019s compare this to static castings, because that\u2019s the biggest confusion point I get. Static castings solidify from the outside in too, but they have a way more random grain structure, and more segregation because gravity pulls the metal down during solidification. Centrifugal casting\u2019s centrifugal force makes the grain structure uniform, so the weldability is better\u2014fewer defects, less segregation, so less cracking. I\u2019ve welded a centrifugal cast pump impeller that had a 2-inch crack from a cavitation issue, and it held up for 3 years without reworking. If that was a static cast impeller, I\u2019d have bet it would fail within 6 months. That\u2019s the difference.<\/p>\n

Now, what about tips for getting a good weld on these parts, straight from a supplier who\u2019s been making these for 12 years? First, always follow the spec sheet we send\u2014we don\u2019t just throw a part in a box and send it; every grade has specific parameters. Second, don\u2019t skip preheat and PWHT. I know it\u2019s an extra step, but I\u2019ve seen too many jobs where someone tried to cut corners and had to replace a $5000 casting because of a weld crack. Third, use the right electrode. Generic stuff is fine for rolled steel, but cast centrifugal needs matching or overmatch, low-hydrogen for high alloy. Fourth, control heat input\u2014don\u2019t cranked up the welder to max power and blow a hole through the casting, especially thin-walled parts. Fifth, do a post-weld inspection, even a quick dye check, to catch small cracks before they turn into big problems.<\/p>\n

I also get asked if you can weld centrifugal castings in the field, not just in the shop. The short answer is yes, but with caveats. If it\u2019s a small repair, like fixing a minor crack on a pump casing that\u2019s not under extreme pressure, you can do it, but you need a portable preheat torch, low-hydrogen electrodes, and you have to wrap the part in insulation after welding to cool it slowly (no letting it freeze in the middle of winter or cool fast in the wind). If it\u2019s a big critical part, like a mining shovel\u2019s bearing hub, don\u2019t do it in the field\u2014tear it down, bring it to a shop with an oven for PWHT, because that\u2019s where most failures happen.<\/p>\n

Let\u2019s talk about a real example. Last year, a coal mine client of ours had a centrifugal cast coal crusher roller that cracked during operation. Their on-site welder tried to fix it without preheating, used a generic electrode, and the crack got bigger when they tested it. They brought it to our recommended welding shop, which preheated it to 250\u00b0C, used E7018-G low-hydrogen electrodes, did a PWHT at 620\u00b0C for 2 hours, and tested it. It\u2019s still running 18 months later, no issues. The client said they saved $12,000 by not having to buy a new roller, just $1,500 for the weld and heat treatment. That\u2019s the payoff of doing it right.<\/p>\n

Now, are there any limitations? Yeah, nothing\u2019s perfect. If you have a super high-alloy centrifugal casting, like a duplex stainless for seawater service, welding it can mess up its corrosion resistance if you don\u2019t control the heat input. The HAZ can become more susceptible to pitting, so you have to use a shielding gas (for TIG or MIG) that\u2019s 98% argon + 2% nitrogen, and cool the weld fast. That\u2019s a specific thing that a lot of welders don\u2019t know, which is why we work with a network of certified welders who specialize in centrifugal cast steel parts.<\/p>\n

Another limit: if you try to weld two different grades of centrifugal castings together, like a carbon steel casting to a stainless steel casting, that\u2019s doable, but you have to use a weld metal that bridges the gap. So for carbon to stainless, use a nickel-based electrode, like Inconel 625, because that accommodates the different expansion rates of the two metals. Skip that, and you\u2019ll get a crack at the joint every time.<\/p>\n

At the end of the day, the key takeaway for anyone working with steel centrifugal castings is: their welding properties are actually pretty good, as long as you treat them like the specialized parts they are, not just big lumps of metal. The uniform grain structure from centrifugal casting makes them more weldable than static castings, but you have to respect the hardening tendencies and residual stresses. Preheat, use the right consumables, do PWHT when needed, and work with someone who knows centrifugal cast parts, not just generic welding.<\/p>\n

<\/p>\n

If you\u2019re working on a project and need help figuring out the best way to weld our centrifugal castings, or you\u2019re looking to source high-quality parts that are easy to weld for your next job, hit us up. We don\u2019t just sell parts\u2014we\u2019ve got years of hands-on experience with our castings, so we can walk you through exactly what to do, no confusing jargon, no hidden fees. Don\u2019t settle for generic metal parts that cause welding headaches; go with centrifugal castings that are designed to perform, including when you need to weld them.<\/p>\n

Upset Forging<\/a> References:<\/p>\n